| Quantity: | |
|---|---|
JET-M/L/P/S
EDWIN
0.45-0.75KW/0.6-1.0HP
40-50L/min
40-50m
Key points :
Self-Priming : A self-priming pump is designed to automatically remove air from the suction pipe, allowing it to prime itself and start pumping water without the need for manual priming. This feature makes it convenient to use and helps in maintaining a continuous water flow.
Jet Pump : A jet pump is a type of centrifugal pump that uses a jet of water or fluid to create suction, which draws water from a well or other water source. It is commonly used for domestic water supply, irrigation, and other similar applications.
1 HP Copper Winding Motor: The motor of the pump has a power rating of 1 horsepower (HP). Copper winding refers to the use of copper wire in the motor windings, which offers better conductivity and heat dissipation compared to other materials. This enhances the motor's efficiency and durability.
Antirust: The antirust feature implies that the pump is designed to resist corrosion and rust, typically by using materials that are resistant to rusting, such as stainless steel or coated components. This ensures the longevity and reliability of the pump, especially in environments where water quality may be corrosive.
This product is designed for the transportation of clean water and similar liquids possessing similar physical and chemical properties. It is suitable for use in sm
all-scale domestic water supplies, automatic water sprinkler systems, small air-conditioning systems, and supporting equipment.
1 year warranty .
Pump :
• Cast iron pump body and support under special antirust treatment
• Rust-free copper inserts prevent impeller's block when starting after the pump is unused for a long time.
• Brass impeller
• AISI 304 shaft
• Max. liquid temperature : +60℃
• Max. suction :+8m
•Self-priming
Motor :
• C&U bearing
• Motor with copper winding
• Built-in thermal protector for single phase motor
• Insulation class : F
• Protection class : lP44
• Max. ambient temperature : +40℃
EDWIN PUMP has been an Self priming Water Pumps suppliers and company from China. Factory export series of pumps which include more than 40 series, 2000 models. We also accept OEM/ODM for many years.
Materials Table | ||
NO. | Part | Material |
1 | Pump Body | HT200 |
2 | Nozzle | PPO |
3 | Venturi | PPO |
4 | Diffuser | PPO |
5 | Mechanical Seal | Carbon/Ceramic |
6 | Impeller | Brass |
7 | Support | HT200 |
8 | Shaft And Rotor | |
9 | Stator | |
10 | Motor Case | Aluminum |
11 | Motor Cover | Cast iron |
12 | Fan | PP |
13 | Fan Cover | |
14 | Capacitor Holding Box | |
15 | Capacitor | |
16 | Terminal Cover | |
Performance Data :
| Model | Power | Inletx Outlet | Max. Flow | Max. Head | Max. Suction | |
| kW | HP | (L/min) | (m) | (m) | ||
| JET60M/L/P/S | 0.45 | 0.6 | 1"x1" | 40 | 40 | 8 |
| JET80M/L/P/S | 0.6 | 0.8 | 1"x1" | 45 | 45 | 8 |
| JET100M/L/P/S | 0.75 | 1 | 1"x1" | 50 | 50 | 8 |
Key points :
Self-Priming : A self-priming pump is designed to automatically remove air from the suction pipe, allowing it to prime itself and start pumping water without the need for manual priming. This feature makes it convenient to use and helps in maintaining a continuous water flow.
Jet Pump : A jet pump is a type of centrifugal pump that uses a jet of water or fluid to create suction, which draws water from a well or other water source. It is commonly used for domestic water supply, irrigation, and other similar applications.
1 HP Copper Winding Motor: The motor of the pump has a power rating of 1 horsepower (HP). Copper winding refers to the use of copper wire in the motor windings, which offers better conductivity and heat dissipation compared to other materials. This enhances the motor's efficiency and durability.
Antirust: The antirust feature implies that the pump is designed to resist corrosion and rust, typically by using materials that are resistant to rusting, such as stainless steel or coated components. This ensures the longevity and reliability of the pump, especially in environments where water quality may be corrosive.
This product is designed for the transportation of clean water and similar liquids possessing similar physical and chemical properties. It is suitable for use in sm
all-scale domestic water supplies, automatic water sprinkler systems, small air-conditioning systems, and supporting equipment.
1 year warranty .
Pump :
• Cast iron pump body and support under special antirust treatment
• Rust-free copper inserts prevent impeller's block when starting after the pump is unused for a long time.
• Brass impeller
• AISI 304 shaft
• Max. liquid temperature : +60℃
• Max. suction :+8m
•Self-priming
Motor :
• C&U bearing
• Motor with copper winding
• Built-in thermal protector for single phase motor
• Insulation class : F
• Protection class : lP44
• Max. ambient temperature : +40℃
EDWIN PUMP has been an Self priming Water Pumps suppliers and company from China. Factory export series of pumps which include more than 40 series, 2000 models. We also accept OEM/ODM for many years.
Materials Table | ||
NO. | Part | Material |
1 | Pump Body | HT200 |
2 | Nozzle | PPO |
3 | Venturi | PPO |
4 | Diffuser | PPO |
5 | Mechanical Seal | Carbon/Ceramic |
6 | Impeller | Brass |
7 | Support | HT200 |
8 | Shaft And Rotor | |
9 | Stator | |
10 | Motor Case | Aluminum |
11 | Motor Cover | Cast iron |
12 | Fan | PP |
13 | Fan Cover | |
14 | Capacitor Holding Box | |
15 | Capacitor | |
16 | Terminal Cover | |
Performance Data :
| Model | Power | Inletx Outlet | Max. Flow | Max. Head | Max. Suction | |
| kW | HP | (L/min) | (m) | (m) | ||
| JET60M/L/P/S | 0.45 | 0.6 | 1"x1" | 40 | 40 | 8 |
| JET80M/L/P/S | 0.6 | 0.8 | 1"x1" | 45 | 45 | 8 |
| JET100M/L/P/S | 0.75 | 1 | 1"x1" | 50 | 50 | 8 |
