| Quantity: | |
|---|---|
Application:
The steel casing centrifugal water pump can be used to transfer clean water or other liquids similar to water in physical and chemical properties. It is suitable for industrial use and urban water supply, pressure boosting for high buildings and fire fighting, garden irrigation, long-distance water transfer, heating ventilation and air controlling, circulation and pressure boosting for cold and hot water or supporting equipment, etc.
Pump:
• Cast iron pump body and support under special anti-rust treatment
• Brass impeller (Stainless steel or PPO)
• AISI 304 shaft
• Max.liquid temperature:+60℃
• Max.suction:+8m
Motor:
• C&U bearing
• Motor with copper winding
• Built-in thermal protector for single phase motor
• Insulation class:F
• Protection class:lP44
• Max.ambient temperature:+40℃
EDWIN PUMP has been a steel casing centrifugal water pump suppliers and company from China. Factory export series of pumps which include more than 40 series, 2000 models. We also accept OEM/ODM for many years.
| Components | Material |
| Pump Body | HT200 |
| Impeller | Brass/Stainless Steel/PPO |
| Mechanical Seal | Carbon/Ceramic |
| Support | HT200 |
| Shaft And Rotor | Stainless Steel |
| Stator | Cold steel |
| Motor Case | Cast iron |
| Motor Cover | Cast iron |
| Fan | PP |
| Fan Cover | Aluminum |
| Terminal Board | PC |
| Model | Power | Inlet x Outlet | Max. Flow | Max. Head | Max. Suction | |
| kW | HP | (L/min) | (m) | (m) | ||
| HCT-07 | 0.55 | 0.5 | 1.5"x1" | 140 | 26 | 8M |
| HCT-10 | 0.75 | 0.75 | 1.5"x1" | 165 | 28 | 8M |
| HCT-15 | 1.1 | 1.5 | 1.5"x1" | 170 | 35 | 8M |
Application:
The steel casing centrifugal water pump can be used to transfer clean water or other liquids similar to water in physical and chemical properties. It is suitable for industrial use and urban water supply, pressure boosting for high buildings and fire fighting, garden irrigation, long-distance water transfer, heating ventilation and air controlling, circulation and pressure boosting for cold and hot water or supporting equipment, etc.
Pump:
• Cast iron pump body and support under special anti-rust treatment
• Brass impeller (Stainless steel or PPO)
• AISI 304 shaft
• Max.liquid temperature:+60℃
• Max.suction:+8m
Motor:
• C&U bearing
• Motor with copper winding
• Built-in thermal protector for single phase motor
• Insulation class:F
• Protection class:lP44
• Max.ambient temperature:+40℃
EDWIN PUMP has been a steel casing centrifugal water pump suppliers and company from China. Factory export series of pumps which include more than 40 series, 2000 models. We also accept OEM/ODM for many years.
| Components | Material |
| Pump Body | HT200 |
| Impeller | Brass/Stainless Steel/PPO |
| Mechanical Seal | Carbon/Ceramic |
| Support | HT200 |
| Shaft And Rotor | Stainless Steel |
| Stator | Cold steel |
| Motor Case | Cast iron |
| Motor Cover | Cast iron |
| Fan | PP |
| Fan Cover | Aluminum |
| Terminal Board | PC |
| Model | Power | Inlet x Outlet | Max. Flow | Max. Head | Max. Suction | |
| kW | HP | (L/min) | (m) | (m) | ||
| HCT-07 | 0.55 | 0.5 | 1.5"x1" | 140 | 26 | 8M |
| HCT-10 | 0.75 | 0.75 | 1.5"x1" | 165 | 28 | 8M |
| HCT-15 | 1.1 | 1.5 | 1.5"x1" | 170 | 35 | 8M |
